****JavaScript based drop down DHTML menu generated by NavStudio. (OpenCube Inc. - http://www.opencube.com)****
Security Accessories
The Brey-Krause line of security accessories were designed for use in demanding environments, such as military bases, correctional facilities, and public housing.
Security accessories are fabricated from type 304 satin finish stainless steel.
Tamper proof screws are included with exposed mount units, except where noted. Wall sleeves and rear wall mounting kits are available. Anchors are not included.
For other types of security accessories, contact the factory.
 |
||
 |
||
Security Grab Bar with Closure Plate 1-1/2" diameter, 18 gauge stainless steel tube with welded 11 gauge closure plate.  |
||
| Centerline Length (inches) | Concealed Mount | Exposed Mount |
| 12 | D-7210-SEC | D-7512-SEC |
| 16 | D-7211-SEC | D-7511-SEC |
| 18 | D-7212-SEC | D-7512-SEC |
| 24 | D-7213-SEC | D-7513-SEC |
| 30 | D-7221-SEC | D-7521-SEC |
| 36 | D-7216-SEC | D-7516-SEC |
| 42 | D-7215-SEC | D-7515-SEC |
| 48 | D-7217-SEC | D-7517-SEC |
Security Shelving 11 Ga. stainless steel, 3-1/2" wide with 6" projection, 1/2" raised lip.  |
||
| Length (inches) | Exposed Mount (pictured above) | Concealed mount |
| 18 | K-6060-18-SS | K-6061-18-SS |
| 24 | K-6060-24-SS | K-6061-24-SS |
| 36 | K-6060-36-SS | K-6061-36-SS |
| Length (inches) | Exposed Mount w/Backsplash | Concealed Mount w/Backsplash |
| 18 | K-6062-18-SS | K-6063-18-SS |
| 24 | K-6062-24-SS | K-6063-24-SS |
| 36 | K-6062-36-SS | K-6063-36-SS |
Security Seats Stainless steel heavy-duty shower seat capable of supporting over 500 pounds for use in security and bariatric facilities. The seat top is fabricated from 14 ga. stainless steel and available in an L-shape or rectangular-shape. All seat tops lock in the upright position using a locking hasp. (Padlock not included) |
||
 |
 |
 |
S-6204-SS |
S-6205-SS |
|
L-Shaped Left Hand- |
L-Shaped Right Hand- 32" x 23" L-projection |
|
S-6501-SS |
S-6502-SS |
|
| Rectangular 16” x 32” - Left Hand Locking Hasp |
Rectangular 16” x 32” - Right Hand Locking Hasp |
|
S-6503-SS |
S-6504-SS |
|
Rectangular 16” x 38” - Left Hand Locking Hasp |
Rectangular 16” x 38” - Right Hand Locking Hasp |
|
| Concealed Mount Security Towel Hook | Concealed Mount Security Hook Strip |
Exposed Mount Security Towel Hook |
 |
 |
 |
| S-4039-SS | S-4037-SS |
S-4040-SS |
| 3” dia. x 2.5” projection (2) 1/4"-20 1-1/2" mounting tee nuts welded to back (hardware not included - access behind wall necessary for installation) |
6” H x 18” W x 2.5” projection (6) 1/4"-20 1-1/2"mounting tee nuts welded to back (hardware not included - access behind wall necessary for installation) |
3” dia. x 2.5” projection Includes (3) 1/4"-20 1-1/2" pin in Torx screws |
| Exposed Mount Security Hook Strip | Hook Strip Shelf | |
 |
 |
|
| S-4038-SS | K-4038-18-SS |
|
| 6” H x 18” W x 2.5” projection Includes (6) 1/4"-20 1-1/2" pin in Torx screws |
5” H x 18” W x 8” projection 18 gauge stainless steel construction (security screws included - hook strip sold separately) |
|
| Break Away Shower Flange | Security Toilet Paper Holder | Toothbrush Holder |
 |
 |
 |
| S-4650-SS | S-4050-SS |
S-4020-SS |
| Spring loaded design releases shower rod when excessive force is applied to 1" dia. rod. Mounts with #10 oval head screw. | 7 ga. stainless steel with 16 ga. 1" dia. tube. Exposed shown, concealed also available. | 11 ga. stainless steel. Exposed shown, concealed also available. |
Heavy Duty Curtain Hook |
Recessed Mount Tumbler |
Recessed Mount Soap Dish |
 |
 |
 |
| S-0152-SS | S-2620-SS | S-2632-SS |
| 11 ga. stainless steel for 1" dia. rod. | 20 ga. stainless steel, beveled for secure fit. S-2621-SS Rear wall concealed mount |
20 ga. stainless steel, beveled for secure fit, dimpled for soap. S-2631-SS Rear wall concealed mount S-2633-SS Soap Dish with Bar S-2635-SS Soap Dish with Bar (rear mount) |
Surface Mount Soap Dish |
Surface Mount Tumbler |
Security Towel Bar |
 |
 |
 |
| S-4010-SS | S-4022-SS | S-4042-24-SS |
11 ga. stainless steel with 3 drain holes and raised edges to hold soap. S-4011-SS Concealed mount. |
11 ga. stainless steel, holds 4 brushes and cup. S-4023-SS Concealed mount. |
1" Dia. x 24" 16 Ga. stainless steel tube with welded 11 Ga. end brackets. S-4041-24-SS Concealed mount |
| Security Mirror | Security Mirror | Security Mirror |
 |
 |
 |
| T-8014-SS 12” x 14” |
T-8011-SS 12” x 14” |
T-8010-BS 12” x 14” |
| Framed seamless corner construction concealed mount mirror. 16 ga. polished bright stainless steel mirror with 18 ga. satin finish stainless steel frame. Back of frame has (6) 1/4”-20 weld nuts (studs not included). | Framed tightly mitered corner construction exposed mount mirror. 16 ga. polished bright stainless steel mirror with 18 ga. satin finish stainless steel frame. Supplied with (8) 1/4”-20 x 1-1/2” pin in torx head screws (wall anchors not included). | Frameless one piece exposed mount mirror 16 ga. polished bright stainless steel mirror. Supplied with (8) 1/4”-20 x 1-1/2” pin torx security screws (wall anchors not included). |
| T-8014-01-SS 18” x 24” |
T-8012-SS 12” x 14” |
|
| Framed seamless corner construction concealed mount mirror. 16 ga. polished bright stainless steel mirror with 18 ga. satin finish stainless steel frame. Back of frame has (8) 1/4”-20 weld nuts (studs not included). | Framed tightly mitered corner construction concealed mount mirror. 16 ga. polished bright stainless steel mirror with 18 ga. satin finish stainless steel frame. Back of frame has (8) 1/4”-20 weld nuts (studs not included). | |
| T-8013-SS 12” x 14” |
||
| Framed seamless corner construction exposed mount mirror. 16 ga. polished bright stainless steel mirror with 18 ga. satin finish stainless steel frame. Supplied with (6) 1/4”-20 x 1-1/2” pin torx security screws (wall anchors not included). | ||
| Security Bow Handle | Hooded Toilet Paper Holder | |
 |
 |
|
| S-4049-SS | S-4052-SS | |
| Handle is 1/4” thick stainless steel. 14 ga. stainless steel closure plate welded to handle. 8-32” threaded holes on 4-1/4” center line provide for concealed mounting. Can be mounted horizontal or vertical (screws not included). | One piece housing is fabricated from 14 ga. stainless steel satin finish. Spindle assembly is fabricated from 7 ga. stainless steel with a 3/8” padlock hole. (padlock and fasteners not included) | |